Fenn
designs and manufactures a full line of wire, rod and
tube processing Drawbenches. Available are both hydraulic
cylinder and motorized chain type units along with a
full selection of features and accessories. Drawbenches
are used for straight length die-drawing of round rod,
wire or tube and also, if used with a Fenn Turks Head,
for producing straight lengths of shaped rod or wire.
All units can be provided with any of the following
features to suit the application:
•
Manual or Hydraulically Actuated Grippers with
removable tooling for wear replacement and tooling
changes for various wire sizes
•
Single or Double Die Boxes, statically mounted
or fully articulating
•
Dry and/or Wet Lube Systems
•
Turks Head Mounting Provisions
•
Draw Pull Force Measurement and Readout
• Full Draw-Cycle Automation
• Safety Covers, Guarding and Electrical
Interlocks
Fenn
designs and manufactures a full line of wire, rod and
tube processing Drawbenches. Available are both hydraulic
cylinder and motorized chain type units along with a
full selection of features and accessories. Drawbenches
are used for straight length die-drawing of round rod,
wire or tube and also, if used with a Fenn Turks Head,
for producing straight lengths of shaped rod or wire.
All units can be provided with any of the following
features to suit the application:
